-
-
- Shoe Production Line Series
- Toe Lasting And Heel Lasting Machines
- Shoe Moulding Machines
- Sole Press Machines
- Shoe Upper Steaming And Softening Machines
- Shoe Steam Heat Setting And Chill Setting Machines
- Shoe Heel Nailing Machines
- Shoe Flattening And Hammering Machines
- Shoe Roughing And Polishing Machines
- Insole And Outsole Making Machines
- Shoe Upper Making Machines Series
- Shoe Sewing Machines
- Leather Measuring And Inspection Machines
- Shoe Cementing Machines
- Others Shoemaking Machines
- Leather Production Machinery
- Shoe Machine Accessories And Tools
-
-
-
-
-
Shoe Making Shoe Upper Vamp Sole Semi Automatic Glue Brushing Machine Oily Rubber Conveyor
Shoe Making Shoe Upper Vamp Sole Semi Automatic Glue Brushing Machine Oily Rubber Conveyor
Features:
1. This machine is suitable for brushing PU adhesive, oil-based adhesive, etc.
Two, closed design, can effectively prevent glue:
The surface solidifies and the concentration becomes higher.
(2) Poor coating, glue is too thick to waste.
The viscosity increases, the glue deteriorates, and the tension is affected.
3.Can save 20%PU glue dosage, effectively improve the air quality of the working environment, maintain the health of the staff.
4. Without glue dipping process, the working efficiency can be increased by more than 8%, and there is sufficient self-inspection time in the operation.
5, equipped with glue brush, how much glue with how much glue, glue is not wasted.
Matters needing attention:
1, before hitting the boot cover, the pressure must be relieved.
2, there shall be no water vapor in the air supply pipe, so as not to cause the deterioration of the glue in the pressure barrel.
3. The pressure of the pressure barrel shall be maintained at about 4kg/cm², and the pressure of the foot switch and the pressure tube switch shall be maintained at about 4kg/cm².
4, the glue outlet valve and air inlet valve should be closed when off work.
5. Keep the pressure barrel pipeline clean. When stop using for more than 48 hours, the machine should be cleaned first to avoid the blockage of the pipeline
This machine is suitable for brush liquid glue.
Pneumatic stirrer shall be equipped to avoid the stratification of the glue. it’s better to use a design of easy-open end, so as to shorten the dispensing time.
Seal design can effectively prevent the glue: ① the surface solidification and concentration rise. ②The poor coating or too thick to waste. ③Viscosity increased or degeneration, to impact the tension.
Save 8% water-based glue dosage. Effectively improve the working environment, to caring staff health.
No need the gluing process, Improved work efficiency by more than 8% to full check in operation.
|
model |
Size |
N.W |
G.W |
air pressure |
|
DF-JW201 |
3250*3250*580mm |
30kg |
45kg |
2-4kg/cm2 |
