Shoe Back Part Moulding Molding Machine,Shoe Counter Moulding Machine introduction

Shoe Back Part Moulding Molding Machine,Shoe Counter Moulding Machine

introduction

PLEASE READ THESE SAFE OPERATION MANUAL CAREFULLY BEFORE USE
DAFENG SHOES MACHINE CO.,LTD  Ergonomics, by human design, digital design. Latest technology enable products can simple operation can  ensure personal safety. Meticulously manufacturing, product efficient reliable.
This manual is designed to help customers correct understanding and use of a
description of the machine, it provides the user with the proper use of the machine
information and related data.
This manual for transportation, moving, installation, commissioning, maintenance,
shoot damage the machine provide the relevant instructions.
After the machine home user, we will provide a good after-sales service. But the
company no longer does not include changes in the manual as a result of any accident
caused by improper operation responsibility.
Manual should be stored in dry, easy to access place. Machine in the sale or transfer,
this manual should be used as part of the machine and machine to the next with a user.
During the entire life of the machine. This manual should be kept properly until the machine
destroyed.
Illustrations in this manual, with instructions purely instructive. The Company may in
the future to modify the production, without prior notice.
WARNING:
THE USER TO USE THE MACHINE BEFORE YOU
READ THE MANUAL.
- 1 -
 
1. Description
DF-863 Primarily designed for bonding upper, shoe heel and shoe cable, while maintaining the
three parts moulding.
Past the front from the machine, you can see a two aluminum mold (cooling mode) and two
rubber mold pad (for moulding upper) component of the central station; in the center point on each
side of an aluminum mold, and a rubber die pad (heat mode), they are heated by the temperature
control system. These are used to hot melt adhesives and shoe heel of a more fitting.
The center of the machine has a control panel, the panel is equipped with a number of switches,
they are: black button to start the machine work cycle; the red button for emergency stop machine;
main switch ON / OFF and lights, refrigeration systems switch.
The top center of the machine is a programmable keyboard with a screen, where you can see
the machine working status and real-time temperature for each workstation. Each workstation is
equipped with a gripper for the stretch uppers. For example: the vertical direction is to be used with
the upper low. Adjust the angle can be used in with the upper. Two adjustable projector lamp for
making shoe lasts posted better results.
The machine is also equipped with four cylinders and a variety of adjustable hand wheel for
setting the die cushion position.
All the electronic components of the machine, including: fuse, electronic cards, transformers,
etc., are housed in the front of the machine control panel boxes.
The right hand side of the machine is a piece of plate, indicating the machine type, serial
number and year.
1.1 Machine transport, operation of safety precautions
This machine is the most important security measures three aspects: handling, machine use
and maintenance.
To make the machine as secure as possible, easy to operate, we set out a list, it points out the
measures already taken the risk of regional and reasons for design can not remove the danger
zone.
Machine at the top of a ring, can be avoided when the machine is raised when the state
instability. Lifting machine for this method to eliminate all risk of tilting during transport. In particular,
we emphasize that these operations should be a professional operator to complete. Because the
reasons for the weight of the machine may generate sway, try slowly raising machine, the transfer
sites to protect the machine clean, and may cause the machine to prevent any dumping of objects
exist, the operator must have relevant experience of staff.
The machine has a rack under the mat, the machine can be avoided when using the forklift
handling produce instability. Over the operation of the machine must also have experienced
personnel to perform. Into the machine at the bottom of the forklift truck to make open the double
fork so lopsided. Move the machine to transport the required minimum height, a little lift to the front
truck forward so as not to dump the machine, as far as possible slowly.
- 2 -  
 
1.2 During use of safety devices.
These machines are manufacturers of security devices to protect the operator's safety at
work.
Will be placed in an aluminum mold upper on his hands grasp the edge near the toe, the
upper gripper edge into the next, a foot switch is closed gripper. Operator to be cautious when in
operation, we must ensure that they have left the gripper fingers, because even if the gripper is also
able to use rubber-coated fingers hurt. When you release the pedal, immediately release the
gripper.
The central station of cold aluminum mold temperature can be reduced to
-20 ℃. Therefore, if the machine is not continuous, the operator against bare hands
touch the cold mold surface.
According to the operator of the set, two heated mold temperature can be
achieved 200 ℃. Touch the mold operator is strictly prohibited.
1.3 Safety Warning
Operator must have sufficient skills and experience to lead to some safety measures to avoid
failure.
If you want to carry out any maintenance on the machines and maintenance, which are not
mentioned in this manual, the need to consult the manufacturer.。
Whenever, in removing the security device into the screw machine maintenance and cleaning
the machine, check all the re-installation of the security device is the same as previously. Because,
even if the protective device is not the right place, the machine can still boot.
These protective devices are used to protect the operator in the course of their work will not be
hurt.
These protective devices running the machine removed for any reason.
Only when the machine is not running, can the movable machine parts for debugging.
- 3 - 
 
2 Technical Data
The required voltage: 50HZ/220V, can float up and down 10%, 60HZ voltage can also work.
To make the machine normally effective, first of all for safety, the machine starts with a
suitable earth ground before it is absolutely necessary.
Electronic circuit: the power electronic circuit board is 12-0-12VDC, control power is 24VDC,
electromagnetic valve is 24Vac, frozen component is 220VAC, heating resistor is 24VAC, cross
projector is 5VDC.
Working pressure: working pressure for the factory adjustable 6 Pa, the machine consumes 136
N1/min.
Pressure Connection: machine pressure from the left-hand side of the 9mm machine rubber tube
and pipe connections.
Air Cycle Oil: Oil flow system: H-class, ISO code for the UNI IIM46.
Recommended Brand：TAMOLL Hydmulie Dil 46 、TOTAL Azolla ZS 46 、AGIP Oso 46 、BP Eaxgol HLP
46 、 ESSO Nuto 46 、SPR3. Tellus oil 46、 Liquid refrigeration cycle: BP antifreeze.
3. Right and wrong machine to use
DF-863 Primarily designed for bonding upper, shoe heel and shoe cable, while maintaining the
three parts moulding. Any use beyond the scope of the use of manual must contact the manufacturer. The
machine can not be issued for the production of any of smoke, toxic gases or explosive material.