PLC Band Knife Leather Splitting Machine Introduction And Instructions For Use

PLC Band Knife Leather Splitting Machine Introduction And Instructions For Use

PLC Band Knife Leather Splitting Machine USE

The machine adapts to splitting the hard or soft leather symmetrically, which the width is less than 620mm and the thickness is less than 8mm, according the required thickness in the industry of leather products, improve the quality of products and strengthen the competitiveness of markets.

PLC Band Knife Leather Splitting Machine CHARACTERS

DF-L620W band knife splitting machine is a new generation of splitting machine developed by DAFENG machinery according to the request of the market. Precise structure, excellent material, high-class processing technical, rigorous process of manufacturing, guarantee the quality and create benefit for the clients.

1.Splitting thickness displayed by plc LCD, the infinitely variable adjustment of feeding, accurate number counting function.

2.New panel make the feeding process more conveniently and quickly.

3.With function of dropping out when it is splitting.

4.With automatic feed registration device, no need to adjust cutting tool.

5.Adjust the clearance of pressure pad and cutting tool automatically to make the splitting precision much higher.

6.Optical magnifier which can see the sharpness of the knife edge.

7.Freestanding set of dust absorbing and knife grinding dust absorbing device.

8.Automatic pause system when leather material entangles in and automatic detection system of electronic phase.

9.Adjusting knife grinding with the single handle device and automatic control equipment when starting.

10.The outsize flying wheel makes the operation of band knife more steady and exact.

11.The accurate rail makes the movement of flying wheel more reliable, and the replacement of band knife more easily and conveniently.

12.The mechanical parts always lubricate.

13.Different functions can be provided by selecting different moulds.

8.Instruction of adjustment

Notice: content in this part is forbidden to adjust optionally, otherwise, may cause accident.

1 .The relationship between band knife, upper feed roller (Feed pole) and down feed roller a)When machine is under normal operation, upper feed roller (Feed pole) and down feed roller should be parallel in two directions which will ensure symmetrical thickness when splitting.

b)The track of band knife should be parallel in two directions with upper feed roller (Feed pole) and down feed roller.

c)The size relationship between band knife, upper feed pole and down feed roller (Showed in picture 10). All data showed in picture has been adjusted strictly before leaving factory, which is forbidden to adjust optionally. (If really needs adjustment, concrete method is as follows)

1)Position adjustment of down feed roller showed (Showed in picture 9) Loosen the locknut in adjusting bolt B, turn adjusting bolt B to make down feed roller moving ahead or backwards until the distance between the down roller axis board in two ends and the knifepoint is 20.7mm which is showed as size D in picture.

2)Utmost upside position adjustment of down feed roller (Showed in picture 9) The minimal gap between knife-edge and down feed roller should equal to or more than 0.10mm. Loosen locknut in adjusting bolt A

in two ends, turn the adjusting bolt A in anticlockwise direction which can increase the gap. Notice: locknut should be locked,

2.Pressure adjustment of upper press blade showed in Picture 6 Tum pressure-adjusting blot C in anticlockwise direction which makes the pressure of press blade decrease. Contrariwise, pressure will increase. The pressure uses the standard that tuning band knife wheel by hands is not very heavy.

3.Adjustment of band knife showed in Picture 1 Newly settled band knife, when not controlled by anything, the normal track which band knife works in flywheel, move ahead slightly (It is unnecessary needs adjust when machine is not changed). If really needs adjust, concrete method is as follows: